Skip to content

Tour days and the traveling party

A run has one row per day. The traveling party is who is on them. Together they decide who is on shared travel, in which room, and who gets a per diem.

Full access and Production can change days and the party. Others who can open the run can read them. See who sees what.

Open a run and select Days, or a tour’s Itinerary tab. Each row has Date, Type, Day, Distance, Belongs to, four rings (Schedule, Travel, Hotel and Party) and To do. A ring tells you what is planned, for example “Night without a hotel”, “2 legs needed” or “1 needs flight”: Done, Needs attention or Not needed. To do counts the open to-dos of the day. With Columns you can add City, Country, Time zone, People, Created and Last Modified.

Above the days are Add events, Add day and Share day sheet, and the views List, Calendar and Map. The run’s summary at the top counts its days, events, travel days and days off, and the approximate distance of the whole run, for example “≈ 2 340 km”. Below the list, choose a date in Extend to and select Extend run.

Tick days to Set type, Set place (city, country and time zone), Copy schedule, Share day sheets or Delete days. A deleted day can come back: select Show deleted, then Restore.

Select Map above a run’s days to see that run’s route. On Tours, the Map view shows one tour at a time: the Tour picker lists your tours, with the next tour first, and remembers your choice. All tours shows every tour at once, each in its own colour.

The Map view of Tours with the Tour picker open, listing All tours and The Low Tides — Winter Run, above the map of that tour and its numbered stop list.The Map view of Tours with the Tour picker open, listing All tours and The Low Tides — Winter Run, above the map of that tour and its numbered stop list.
The map of a run: Next 2 weeks, Next month and All at the top, the Shows, Hotels and Travel buttons, numbered stops from Amsterdam to Lyon joined by solid, dashed and dotted lines, the legend, and beside the map the stop list with the same numbers and 5 legs not booked yet with Show only these.The map of a run: Next 2 weeks, Next month and All at the top, the Shows, Hotels and Travel buttons, numbered stops from Amsterdam to Lyon joined by solid, dashed and dotted lines, the legend, and beside the map the stop list with the same numbers and 5 legs not booked yet with Show only these.
  • Each stop has a number in route order. The list beside the map uses the same numbers. Select a row to find its stop on the map.
  • The lines show how you travel: a solid line is a booked road leg, a dashed arc is a booked flight, and a dotted grey line is a leg that is not booked yet. As the legend says, legs are straight lines until they are booked.
  • Point at a stop or a line to see its dates, its hotel, the legs in and out and the distance. On a leg that is not booked, select Add travel to book it.
  • Two shows on the same day are two stops. A venue whose exact place is not known shows at its city.
  • When you zoom out, stops that are close together merge into one circle with a number: how many stops it holds. Select it to zoom in.
  • Next 2 weeks, Next month or All choose the period. A tour with more than 20 stops opens on Next 2 weeks. OPERO remembers your choice.
  • Shows, Hotels and Travel show or hide the stops, the hotels and the lines.
  • Above the list, “5 legs not booked yet” counts the legs still to book. Show only these shows only those legs; Show all brings the rest back.
The same run on Next 2 weeks: only the stops of the coming two weeks, from Berlin to Brussels, are on the map and in the list.The same run on Next 2 weeks: only the stops of the coming two weeks, from Berlin to Brussels, are on the map and in the list.
The map with Show only these selected: only the legs that are not booked yet are drawn, in orange dots, and the button now reads Show all.The map with Show only these selected: only the legs that are not booked yet are drawn, in orange dots, and the button now reads Show all.

Select a stop, or Open day on its card, to open that day. The day panel pushes the map aside, so the whole route stays in sight next to it. Use the arrows at the top of the panel, or the arrow keys, to step through the days: the map follows and marks the day’s stop or leg. On a narrow window, the list of runs folds away to make room.

A run's map with the day panel open for Sat, 28 Nov 2026 in Cologne, a travel day: the map moved aside on the left with the day's stop marked, and the panel on the right with Day details, the distance from Brussels and Add travel.A run's map with the day panel open for Sat, 28 Nov 2026 in Cologne, a travel day: the map moved aside on the left with the day's stop marked, and the panel on the right with Day details, the distance from Brussels and Add travel.

The map needs your workspace’s Mapbox token. Without it, the map says “The map needs a Mapbox public token”, and the stop list beside it still works. Full access sees Add Mapbox token; see Connect maps. Days without a city have no stop: “No location yet: add cities to this run’s days.” A place OPERO could not find is looked up again after 7 days.

Show, Travel, Off, Rehearsal, Promo and Not planned come with OPERO. Settings → Touring → Day types adds more with Add day type. Only Show days have finance and tickets. A new type acts as a day without a show. Drag the day types into the order you want, or use Move up and Move down: every day type picker follows that order.

Select a day. It says “Day 3 of 12” with its type and time zone. Under Day details you can change the Day type, Country, City and Time zone (on a travel day, From city and To city), and the Event (optional). Distance shows how far the day is from the place before it (see Distances). It shows:

  • the event, with its status, advancing progress, guestlist and local personnel, and Show full advancing to see the event’s whole advancing here (Hide advancing closes it). Open event opens the event on its Advancing tab;
  • Travel, with Add travel and Add flight;
  • Hotel, with Add hotel and Rooming list;
  • Who is here today;
  • Per diems for the day;
  • Notes for the day;
  • buttons for Day sheet PDF, Print day sheet, Share day sheet, Copy to other days and Delete day.

Copy to other days copies the Schedule, Traveling party, Guestlist quotas or Travel and hotel to days you choose. Days that already have a schedule keep it. New items are added, and nothing is deleted.

The time zone follows the country: a new country brings its time zone. If the country has several, the day says “This country has several: pick the zone for this city.” A row warns when the zone is not one of its country’s.

Deleting a day keeps it for a while. The day then says “This day was deleted. Restore brings back its travel, hotels and costs.” Select Restore to bring it back.

OPERO shows about how far each day is from the place before it, for example “≈ 91 km”. It is a straight line between the two places on the map (the venue, else the city, else that night’s hotel), not the driving route, so the road is usually longer. Hover over it for more, for example “≈ 91 km · from Vilnius · about 2 h”. The time comes from the travel leg if there is one, otherwise it is an estimate. A flying day is marked as such.

No distance is shown when the day has no known place, when it is in the same city as the place before, or on the first day. Places such as “TBC” or “Home” are never measured.

You see the distance in the Distance column of the days and of Runs, on the day panel, on the map, in the run’s summary, on the Today on tour widget, and on the day sheet, driver sheet and road book.

The day stays and says “Canceled:” with the event’s name. It lists what is still booked (“The event is canceled. These are still booked on this day.”). Review bookings lists its hotel and travel so you can Cancel booking. Make it a day off changes the type, and Tell the team opens the day for an update.

Open the tour’s or event’s People tab and select Traveling party, or the run’s Traveling party tab.

  1. Select Add to traveling party.

  2. Search for the person in People. Choose the Group (Management, Artist or Crew) and the Role.

  3. Select Add.

To clear Travels with the party by default for someone who joins only on some days, or to set an Own per diem rate (on a run, for people who see costs), select Edit in the row’s menu.

Add usual party adds the people saved as the artist’s usual party. An artist’s usual party is on the Touring tab of the artist.

A row shows the person, role, each day’s status and access. Management uses a power user seat; artist and crew are free viewers. Someone in Management without a paid seat is marked Needs a power user seat. They are still saved. The row’s menu has Edit, Travel profile, Road book for this person, Add to Team, for a fee and Remove.

Removing someone keeps their statuses, passes and payments on the row, but they leave every list, count and the mobile app. You can remove a person even after updates were sent to them. Turn on Show deleted to see removed people, and select Restore to bring one back. Restore is refused while the same person is in the party again.

Set a person’s status for a day:

Status Shared travel Room Per diem
Traveling (with the party) Yes Yes Yes
Not on this day No No No
Fly in No: own flight Yes Yes
Fly out No: own flight No No
Fly in and out No: own flights No No

A fly-in or fly-out needs a personal flight. OPERO shows “needs a flight” on the day until a leg exists, and Book on the day goes there.

The party holds per diems, not fees. Fees stay on Team. Add to Team, for a fee adds the person to the Team of each show. An artist’s fee is on the event’s cast, so an artist shows Fee on cast instead.

Ask who is coming sends a message to the whole party: “Please check your days on this run and tell us about any change.” You can change it. Set each person’s days from their answers.