Add an expense with a receipt
Upload a receipt or an invoice, and OPERO reads it with AI: the supplier, the total, the VAT rate, the dates and the invoice number. It fills in a new expense for you. You check what it read, choose the event the cost belongs to, and save. The file stays linked to the expense, so you can always open it again.
This page covers the AI part. For every field of the expense form, see Add an expense.
Before you start
Section titled “Before you start”- You need Full access or Finance access to create expenses.
- Have the receipt or invoice as a file. A photo (JPG, PNG, HEIC, WebP, GIF) or a PDF works best. OPERO also reads Excel, CSV, Word (.docx) and text files. Each file can be up to 10 MB.
- Know which event, tour or overhead the cost belongs to. OPERO cannot guess this from a receipt.
Ways in
Section titled “Ways in”You can start in two places:
- From a new expense (the steps below): the expense form is open, and you upload the file into it. Best when you are entering costs one by one.
- From the Documents page: you upload the file first, and create the expense from the document later. Best when you collect many files and book them later. See Start from the Documents page.
Upload the receipt into a new expense
Section titled “Upload the receipt into a new expense”-
In the sidebar, under Finance, select Expenses. Then select New Expense at the top right. You can also select Add expense on an event’s Finance tab: then the event is already chosen as the reference.
-
The New expense panel opens on the right. Select the Documents tab. It says Upload an invoice or receipt — AI will extract the fields for you. Select + Upload Document.
-
The Upload documents panel opens. Drag the file into the grey box, or select browse and choose the file.
-
Wait while OPERO reads the file. The line under the file name shows “Uploading…”, then “AI processing…”. This usually takes 10 to 30 seconds. When it shows Complete, the second line tells you what OPERO found: the type of document (for example Receipt), how sure the AI is (for example “85% confidence”), the total it read, and the supplier.
-
Select Done. The panel closes and the expense form opens on the Details tab, filled in from the file. The panel shows Not Saved until you save.
-
Check every field OPERO filled in (see the table below). Correct anything that is wrong. Pay special attention to Actual and VAT Rate: they decide the amount that counts in your totals.
-
In Reference, choose the event (or, after changing Applies To, the tour or overhead) that the cost belongs to. OPERO never fills this in from a new receipt. If you forget it, OPERO shows “Please select a reference (event, tour, or overhead)” and does not save.
-
Save:
- Select Save if the cost is not paid yet. The expense is saved as unpaid (or overdue, see below).
- If you already paid it, for example a card receipt, tick Already paid, choose Bank transfer, Cash or Card, and select Save. OPERO saves the expense and records one payment for the full amount with VAT. See What happens after you save.
What OPERO fills in
Section titled “What OPERO fills in”OPERO fills in a field only if it is still empty. Anything you typed before the upload stays.
| Field | What OPERO puts in it | What to check |
|---|---|---|
| Expense Category | The category that fits what the AI thinks the cost is, for example Marketing for printed posters. Only one of your own categories, never a new one. | The category is a guess. Change it if it does not fit. |
| Reference | Nothing. You choose the event, tour or overhead. | Required. |
| Actual | The total of the document, with VAT. The switch next to the field is set to incl VAT, and OPERO shows below it the amount without VAT and the VAT. For example, 181,50 € shows “ex VAT: 150,00 € · VAT: 31,50 €”. OPERO stores the amount without VAT. | That the total is right, and that incl VAT is selected. |
| Currency | Stays EUR. If the document is in another currency, OPERO asks you first. See Receipts in another currency. | |
| VAT Rate | The rate printed on the document, if it is 0%, 5%, 9% or 21%. If the AI could not read a rate, the field is empty and says “Not read from the document — choose the rate.” OPERO does not save until you choose one (0% included). | That the rate matches the document. A wrong rate changes the amount without VAT. |
| Date and Invoice Date | The date of the document. | |
| Due Date | The due date printed on the document. If there is none, the date of the document plus 10 days. | A receipt has no due date, so this is usually the “plus 10 days” guess. See the tip about overdue below. |
| Supplier | The name of the company that issued the document. | The spelling. If the supplier is new to OPERO, OPERO adds it to your suppliers when you save. |
| Invoice Number | The number of the document. | |
| Notes | A short description of what was bought. | |
| Budget | Nothing. | Add a budget if you plan it. |
The Documents tab now shows the file with “Fields auto-filled — check Details tab”. To use another file instead, select Replace document there.
How sure is the AI?
Section titled “How sure is the AI?”The confidence (for example “85% confidence”) says how sure the AI is about what kind of document it is and in which direction the money goes. It is not a check of each amount. Always look at the total and the VAT rate yourself, even at a high confidence.
If the line reads “Unknown · 0% confidence”, OPERO could not read the file (for example a blurred photo, or the AI is not available at the moment). Nothing is filled in. Select Done and fill in the expense yourself.
What happens after you save
Section titled “What happens after you save”- The expense appears in Finance › Expenses, on the event’s Finance tab and in the event’s profit and loss. In the Expenses list it carries the sparkle icon that the legend calls “AI from a document”.
- The payment status follows the due date. With Save, the expense is unpaid. If the due date (often the date of the receipt plus 10 days) has already passed, OPERO shows it as Overdue at once. With Already paid ticked, it is Paid.
- Already paid records one payment: the full amount with VAT, dated on the expense’s Date (the date of the receipt), with the method you chose. OPERO remembers the method for next time. To change it later, open the payment on Finance › Payments. See Payments.
- The file is kept in Documents (in the sidebar), linked to the new expense. On the Documents page its status is Linked and the “Linked to” column names the expense. When you open the expense, its Documents tab lists the file. Select it to open it.
- The Source Document field of the expense stays empty. The link between file and expense is the one on the Documents tab.
If you do not save
Section titled “If you do not save”If you close the form or select Cancel, OPERO asks “Discard this expense?”. Select Discard to close it. The expense is not saved, but the uploaded file stays on the Documents page, with the status Needs Assignment. From there you can create the expense later or delete the file. See the next section.
Uploading the same file twice
Section titled “Uploading the same file twice”OPERO keeps one copy of each file. If you upload a file that is already in OPERO, the line says Already uploaded and “This document already exists” with its name. Nothing is filled in. Select Dismiss to close it. From an event’s Documents tab you can select Link it instead, to link the existing file to that event.
To read the same receipt into a new expense, open the existing document on the Documents page and create the expense from there.
Start from the Documents page
Section titled “Start from the Documents page”-
In the sidebar, select Documents. Then select Upload at the top right.
-
Upload the file in the Upload documents panel, as above, and select Done when it shows Complete.
-
Select the new document in the list. Its panel shows what OPERO read: Status (with the AI’s confidence next to it), Type (for example Receipt), Direction (Income, Expense or Neutral), the File, and under Extracted data the Amount, currency, date, document number, Counterparty, category and description. Under AI suggests creating you see the expense OPERO proposes: the Entry, the amount, who it is from, the Confidence and why.
-
If the Direction is wrong, select the right one. OPERO creates an expense only for Expense.
-
Select Create Expense at the top of the panel. (When the AI is less than 85% sure, the button reads Review & Create.) The New expense form opens, filled in from the document in the same way as above. The notes read “AI-processed from” and the name of the document. Choose the Expense Category if it is empty, choose the Reference, check the fields and select Save.
After you save, the document is Linked to the new expense, and its panel shows the expense under Created record, with an Add payment button. See Payments.
When OPERO creates the expense by itself
Section titled “When OPERO creates the expense by itself”OPERO creates the expense without asking when all of this is true:
- the document is assigned to exactly one event, tour or overhead (you uploaded it on that record’s Documents tab, or selected Assign to record on the document and saved the assignment),
- the AI classified it as an invoice or a receipt, money going out,
- the AI read a VAT rate on it, and
- the AI is at least 85% sure.
The document then shows the status Completed, and the new expense is unpaid, with its category, amount, dates and invoice number from the document. Check it like any other expense. If one of the conditions is missing, OPERO waits for you: the document stays in Pending Review (or Needs Assignment, if it is not assigned), and you create the expense with Create Expense.
Receipts in another currency
Section titled “Receipts in another currency”OPERO keeps all amounts in euros. If the document is in another currency, OPERO does not change the currency by itself. Instead, under the amounts it says “This document looks like it is in USD. Opero stores euros — convert it at a rate you supply?” (with the currency it found).
- Select Convert from USD (the button names the currency) to switch the expense to that currency. Then type the exchange rate. See Foreign-currency invoices.
- Select It’s EUR if the document is in euros after all.
Change or delete it later
Section titled “Change or delete it later”- Change the expense: open it and select the pencil. See Add an expense.
- Add another file: open the expense, go to the Documents tab and select Upload. OPERO reads the file, but does not change the expense.
- Delete the expense: see Add an expense. Deleting the expense does not delete the file. The file stays on the Documents page and goes back to Pending Review.
- Delete the file: on the Documents page, open the document, open the ··· menu and select Delete document. Confirm with Delete. This cannot be undone. The expense stays.
- Photograph the whole receipt, flat and sharp. The total and the VAT line matter most.
- A receipt you paid on the spot: tick Already paid before you save, so it does not show as overdue.
- The AI’s category is a starting point. If OPERO often picks the wrong one for a supplier, correct it each time; the category list is described in Expense categories.